PelletVent® Video Series
PelletVent®: Air Intake Kit
PelletVent®: Ceiling Support Box
PelletVent®: Chimney Adapter
PelletVent® Air Intake Kit allows fresh air into an existing pellet stove installation that had been using inside air. It allows an installer to decide the best possible location for the air intake vent, not the same location as the wall thimble.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent® Ceiling Support Box is used to support pipe going up through the roof with trim and clamp included.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent® Chimney Adapter is used to transition from PelletVent to existing chimney such as DuraPlus. Requires a DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble.
For 6”, use adapter 3PVL-X6 and 4PVL-X6.
For 8”, use adapter 3PVL-X8 and 4PVL-X8.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent®: Increaser Adapter
PelletVent®: Individual Lengths
PelletVent®: Storm Collar & Flashing
PelletVent® Increaser Adapter is used to transition from 3” pipe to a 4” pipe. *Note: Not a decreaser or stove adapter.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent® lengths feature fully unitized, twist-lock construction in 3” and 4” diameters. Listed at 1” clearance to combustibles. It can be used in both vertical and horizontal installations.
Adjustable Pipe Lengths are used to add length to PelletVent pipe. 12” pipe adds 3”-10” of length when used with rigid sections of pipe.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
Adjustable Flashing is used to weatherproof the penetration of vent pipe through the roof.
Storm Collar is required and is used to maintain a weather tight resistant seal between the pipe and the flashing. Seal the underside with 500° F silicone sealant to the vent.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent® Kit: 90° and 45° Elbow Kit
PelletVent® Kit: Appliance Adapter
PelletVent® Kit: Clean Out Tee
90º and 45º elbows offset obstructions as needed and swivel 360° at base.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent Appliance Adapter is attached to appliance outlet allowing for easy pipe connection. Seal adapter to appliance with high temperature sealant.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent Clean Out Tee is used for a 90° offset. Branch swivels for alignment. Removable twist-lock Clean-Out Tee Cap.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent® Kit: Horizontal and Vertical Termination Caps
PelletVent® Kit: Wall Support Bracket
PelletVent® Kit: Wall Thimble
Vertical Cap: Used for vertical installations only. Required where pipe terminates above the roofline.
Horizontal Cap: Used for horizontal terminations only. Cap features swivel collar to adjust exhaust direction and an optional swivel base.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent Wall Support Bracket is used to support vent pipe or tee sections providing 1” clearance.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.
PelletVent Wall Thimble is used to provide the required 1” clearance to combustibles. Fits between standard wall studs. Comes with an insulation ring to cut drafts where the pipe slips through the thimble.
System: PelletVent is the #1 venting system for stoves and inserts that use wood pellets or oil fuel.