PolyPro pipes are used for venting water heaters, condensing boilers and warm air furnaces. PolyPro is an environmentally safe and engineered alternative, for condensing gas appliances. Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals. PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over 20 years. Polypropylene has a higher operating temperature limit of 230°F/110°C (PVC is 149°F/65°C max and CPVC is 194°F/90°C). PolyPro is engineered with a corrosion-free, condensation management system.
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas-burning appliances, including high efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Materials and Construction
Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets.
0″ clearance to combustibles for exhaust temperatures up to 194°F / 90°C, and 0″ clearance for vertical installations up to exhaust temperatures of 230°F / 110°C and ¼” / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230°F / 110°C . PolyPro concentric vent system components, including concentric Horizontal Termination and Vertical Termination, are listed at 0″ clearance to combustibles for exhaust temperatures up to 230°F / 110°C.
2″ (60mm), 3″ (80mm), 4″ (100mm), 5″ (130mm)
2″×4″ (60mm×100mm), 3″×5″ (80mm×130mm), 4″×6″ (100mm×150mm)
Listed with the appliance in the USA, check with appliance manufacturer. Intertek / ETL listed to ULC-S636 Listed as a Class IIA, IIB, and IIC vent system.
Previously the CSA certification trademark was shown in error in conjunction with the PolyPro product – references have been removed.
Limited Lifetime Warranty
Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation.
- PolyPro® Installation Instructions-English
- PolyPro® Installation Instructions-French
- PolyPro® Double Wall Installation Instructions-English
- PolyPro® Double Wall Installation Instructions-French
- PolyPro® for Multiple Vents Installation Instructions-Bi Lingual